Micro AC Drive


 

ME2 Series: Micro AC Drive

AC Supply Voltage
230 / 460 Vac

HP Ratings
0.25 to 3 HP

 

The ME2 Series is a compact AC drive that, depite its small size, has the features you need. With 150% overload capacity for one minute, the ME2 Series is fully rated and fully protected. Protection features include UL listed solid state overload, overvoltage, undervoltage, power loss ride-thru, stall revention , short circuit, ground fault protection and heat sink overtemp sensing.

Designed to perfom, the ME2 Series offers FWD and REV inputs, plus two multi-function inputs which can be programmed for job, emergency stop, reset and preset speed. a multi-function N.O. relay output contact is available for indicating fault, at speed/frequency or run. Even DC injection braking is standard in the ME2 Series.

Easy to Install & Program

The ME2 Series takes up less panel space than other drives in its class and, with single phase power input as standard, wiring time is minimal. All of the wiring terminals are easily accessible without removing any covers, yet “finger safe” to meet IEC standards. The ME2 Series is a standard IP20 chassis with an optional DIN rail adapter (1HP and below) for mounting versatility.

Easy to Operate
Unlike some micro drives on the market today, the ME2 Series comes standard with a built-in “finger-sized” keypad operator. No hand-held programmers, pens or tiny screw drivers are needed for set up... simply press the up down arrows to program the drive. The ME2 Series drive can be
operated either directly via the keypad or remotely via a PLC, analog inputs or a 10k potentiometer.